MEWOI110L Split Type High Accuracy Leakage Current Sensor Probe

  • Name:
    MEWOI110L Split Type High Accuracy Leakage Current Sensor Probe
  • Model No.:
    MEWOI110L
  • Main Features:
    1.Split CT Clamp:Φ10 mm,2.Range:0.000mA~ 60(AC), Resolution: 1uA, Accuracy 1%,3.Current induction output,Direct Coil tap. Coils Turn:1:800, 4.Double shielding, anti-jamming capability, suitable for leakage current,small current test
Electricity Testing Instruments manufacturer, Support OEM/ODM, your testing specialist
share:

INTRODUCTION

Click to download:  Selection Map

MEWOI110L Split Type High Accuracy Leakage Current Sensor is used for measurement of high accuracy AC current, leakage current, high order harmonic current, phase, power energy, power, power factor. Adopt the latest CT technology, double shielding layer and split type design, no need to disconnect the measured circuits, non-contact, safe and fast. It can be connected with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, harmonic analyzer, electric power quality analyzer, high precision digital multi-meter, etc. Widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises.
MEWOI110L Split Type High Accuracy Leakage Current Sensor’ core is made of special alloy, adopt the newest magnetic shielding techniques, can almost shield the influence from external magnetic field, to ensure the high precision, high stability and high reliability of perennial uninterrupted measurement.

TECHNICAL SPECIFICATION
Function
Measurement of AC current, leakage current, high order harmonic current, phase, power energy, power, power factor
Test mode
Split Type CT
Clamp Size
Φ10mm(available for line ≤10mm)
Range
0-60A AC
Resolution
1uA  AC
Accuracy
±1.0%FS(50/60Hz; 23℃±2℃,below 70%RH, keep the wire be in the center of hole)
Coils Turn
800:1(customize is available)
Phase Error
≤2°(50Hz/60Hz; 23℃±2℃)
Reference Load
RL: 0-600mA≤300ohm; 0-6A≤30ohm; 0-60A≤3ohm;
Shielding
With shielding layer, apply to complicated environment with interference
Output Interface
Current induction output
Output Mode
3.5mm audio plug(tail plug, banana pin, or BNC pin)
Output Wire Length
2m
Electric Field InterferenceAbout 5mA when the external electric field 100A, 10mm nearby
Measured Wire Position
Approximately in the geometric center of the hole
Current Frequency
45H-60Hz(when measuring big current)
Frequency
10Hz-100kHz
Voltage of circuit
AC 600V
Dimension
53mm×42mm×28mm
Weight
125g
Working Environment
-20℃-50℃; below 80%rh
Storage Environment
-10℃-60℃; below 70%rh
Insulation Strength
AC 2kV/rms. (between core and shell)
Safety Rules
IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V)
Accessory
Sensor :1pc

APPLICATION

MEWOI Application.jpg

SELECTION GUIDE 

Split Type Current Sensor Probe

Click "Blue" marked Model No. to view the Spec

Model No.RangeClamp SizeResolutionCoils TurnCurrent induction output,Direct Coil tapDouble shielding, anti-jamming capability, suitable for leakage current, small current test
MEWOI110LMEWOI110L.001.80.jpg0.000mA~ 60(AC)Φ10mm 1uA, Accuracy 1%1:800 
MEWOI110LEMEWOI110LE.80.jpg0.0mA~ 100mA(DC)Φ10mm 0.1mA, Accuracy 3%1:800 
MEWOI125LMEWOI125L.80.001.jpg0.000mA~ 60(AC)Φ25mm 1uA, Accuracy 1%1:800 
MEWOI125LEMEWOI125LE.80.001.jpg0mA~ 100mA(DC)Φ25mm   1mA, Accuracy 3% 1:800 
MEWOI140LMEWOI140L.80.jpg0.00mA~ 200(AC)Φ40 mm   10uA, Accuracy 1%1:800 
MEWOI140LEMEWOI140LE.80.002.jpg0mA~ 100mA(DC)Φ40 mm   1mA, Accuracy 3%1:800 
MEWOI185LMEWOI185L.80.jpg0.000mA~60A(AC)85*20mm   1uA, Accuracy 1%1:800 


TECHNICAL SPECIFICATION
FunctionMeasurement of AC current, leakage current, high order harmonic current, phase, power energy, power, power factor
Test modeSplit Type CT
Clamp SizeΦ10mm(available for line ≤10mm)
Range0-60A AC
Resolution1uA  AC
Accuracy±1.0%FS(50/60Hz; 23℃±2℃,below 70%RH, keep the wire be in the center of hole)
Coils Turn800:1(customize is available)
Phase Error≤2°(50Hz/60Hz; 23℃±2℃)
Reference LoadRL: 0-600mA≤300ohm; 0-6A≤30ohm; 0-60A≤3ohm;
ShieldingWith shielding layer, apply to complicated environment with interference
Output InterfaceCurrent induction output
Output Mode3.5mm audio plug(tail plug, banana pin, or BNC pin)
Output Wire Length2m
Electric Field InterferenceAbout 5mA when the external electric field 100A, 10mm nearby
Measured Wire PositionApproximately in the geometric center of the hole
Current Frequency45H-60Hz(when measuring big current)
Frequency10Hz-100kHz
Voltage of circuitAC 600V
Dimension53mm×42mm×28mm
Weight125g
Working Environment-20℃-50℃; below 80%rh
Storage Environment-10℃-60℃; below 70%rh
Insulation StrengthAC 2kV/rms. (between core and shell)
Safety RulesIEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V)
AccessorySensor :1pc

Sensor :1pc