MEWOI110LE Split Type High Accuracy Leakage Current Sensor Probe

Electricity Testing Instruments manufacturer, Support OEM/ODM, your testing specialist

  • Main Features:: 1.Split CT Clamp:Φ10 mm,2.Range:0.0mA~ 100mA(DC), Resolution: 0.1mA, Accuracy 1%,3.Output: 25mV/1mA, power supply:9VDC Coils Turn:1:800, 4.Double shielding, anti-jamming capability, suitable for leakage current,small current test
  • Model No.:: MEWOI110LE
  • Name:: MEWOI110LE Split Type High Accuracy Leakage Current Sensor Probe

INTRODUCTION

MEWOI110LE Split Type High Accuracy Leakage Current Sensor is used for measurement of high accuracy DC leakage current, low DC current. Adopt the latest CT technology, double shielding layer and split type design, portable, install on line, no need to disconnect the measured circuits, non-contact, safe and fast. It can be connected with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, harmonic analyzer, electric power quality analyzer, high precision digital multi-meter, etc. Widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises.


TECHNICAL SPECIFICATION
Function
Measurement of DC leakage current, low DC current
Test mode
Split Type CT
Power supply
9VDC±1VDC
Power dissipation
20mA max
Clamp Size
Φ10mm(available for line ≤10mm)
Range
0-100mA DC
Resolution
1mA  AC
Accuracy
±3.0%FS(50/60Hz; 23℃±2℃,below 70%RH, keep the wire be in the center of hole)
Coils Turn
800:1(customize is available)
Signal output
25mV/1mA,
Response speed
2 times/sec
Output interface
Brown—positive power input; Yellow—terminal of alert control; Blue—anode signal output; black—GND(cathode power output and cathode signal output, can short circuit with shielding shell )
Output Wire Length
2m
Electric Field Interference
3mA
Measured Wire Position
Approximately in the geometric center of the hole
Voltage of circuit
AC 600V
Dimension
53mm×42mm×28mm
Weight
125g
Working Environment
-20℃-45℃; below 80%rh
Storage Environment
-10℃-60℃; below 70%rh
Insulation Strength
AC 2kV/rms. (between core and shell)
Safety Rules
IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V)
Accessory
Sensor :1pc

APPLICATION

MEWOI APPLICATION.jpg

SELECTION GUIDE 

Split Type Current Sensor Probe

Click "Blue" marked Model No. to view the Spec

Model No.RangeClamp SizeResolutionCoils TurnCurrent induction output,Direct Coil tapDouble shielding, anti-jamming capability, suitable for leakage current, small current test
MEWOI110LMEWOI110L.001.80.jpg0.000mA~ 60(AC)Φ10mm 1uA, Accuracy 1%1:800 
MEWOI110LEMEWOI110LE.80.jpg0.0mA~ 100mA(DC)Φ10mm 0.1mA, Accuracy 3%1:800 
MEWOI125LMEWOI125L.80.001.jpg0.000mA~ 60(AC)Φ25mm 1uA, Accuracy 1%1:800 
MEWOI125LEMEWOI125LE.80.001.jpg0mA~ 100mA(DC)Φ25mm   1mA, Accuracy 3% 1:800 
MEWOI140LMEWOI140L.80.jpg0.00mA~ 200(AC)Φ40 mm   10uA, Accuracy 1%1:800 
MEWOI140LEMEWOI140LE.80.002.jpg0mA~ 100mA(DC)Φ40 mm   1mA, Accuracy 3%1:800 
MEWOI185LMEWOI185L.80.jpg0.000mA~60A(AC)85*20mm   1uA, Accuracy 1%1:800 

TECHNICAL SPECIFICATION
FunctionMeasurement of DC leakage current, low DC current
Test modeSplit Type CT
Power supply9VDC±1VDC
Power dissipation20mA max
Clamp SizeΦ10mm(available for line ≤10mm)
Range0-100mA DC
Resolution1mA  AC
Accuracy±3.0%FS(50/60Hz; 23℃±2℃,below 70%RH, keep the wire be in the center of hole)
Coils Turn800:1(customize is available)
Signal output25mV/1mA,
Response speed2 times/sec
Output interfaceBrown—positive power input; Yellow—terminal of alert control; Blue—anode signal output; black—GND(cathode power output and cathode signal output, can short circuit with shielding shell )
Output Wire Length2m
Electric Field Interference3mA
Measured Wire PositionApproximately in the geometric center of the hole
Voltage of circuitAC 600V
Dimension53mm×42mm×28mm
Weight125g
Working Environment-20℃-45℃; below 80%rh
Storage Environment-10℃-60℃; below 70%rh
Insulation StrengthAC 2kV/rms. (between core and shell)
Safety RulesIEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V)
AccessorySensor :1pc

Sensor :1pc

Telephone
E-mail
After Sales
QQ