MEWOI9600C Leakage Protector Tester,RCD（Residual Current Device）Tester
| Contact Us for Quotation | Email：mewoi@mewoi.com | Whatsapp: +8618620373879 |
| MEWOI9600C Leakage Protector Tester is designed to test the line AC voltage, leakage initiating current, residual non-operating current and leakage initiating separation time of various leakage protectors online, the test current from 5~1000mA with 16 grade (5、10、15、20、30、40、50、60、100、150、200、250、300、500、600、1000mA), range of the leakage initiating separation time is 0~999ms, adopts 854X480 colorful touch LCD display, with battery power display, setting fault voltage indication, backlight brightness adjustment, internal wiring guidance diagram, convenient and direct-viewing, easy to operate. With high precision, small size, light weight, delicate appearance and easy to carry, the meter is an ideal tool for on-site or indoor detection of various leakage protectors. |
TECHNICAL SPECIFICATION
Power Supply | 7.4V, rechargeable lithium battery (full about 8.4V) |
Test Line Voltage | Below AC 600V, in relay protection switch testing: below AC 250V |
Rated Voltage | AC 220V |
Leakage Current Gears | (5、10、15、20、30、40、50、60、100、150、200、250、300、500、600、1000)mA |
AC Voltage Gears | 0～600V |
Leakage Operating Time Range | 0~999ms. |
Leakage Operating Time Accuracy | 5%rgt±3%dgt |
Gears Current Accuracy | ±10%rgt±5dgt |
Gears Voltage Accuracy | ±2rgt%±3dgt |
Failure Information Indication | LCD display “999” over time indication, it is possible that the rated initiating current grade of tested is too small or the leakage protector is faulty. |
Test Wire Length | 1.8M |
Test Mode | Manual or automatic |
Display Mode | LCD: 7 inches, TPT color touch screen |
Meter Dimension | 215mm×178mm×83mm |
Battery Voltage | When the battery voltage lower than 7.0V, low battery voltage symbol display, and remind to replace the battery. The measurement value is also accurate at this time |
Working Current | 365mA Max |
Working Temperature | -10℃-40℃, below 80%rh. |
Storage Temperature | -10℃-60℃, below 70%rh. |
Insulation Strength | ≥100MΩ, AC 2kV/rms (between the shell and the screw). |
Suitable Safety Standard | IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT = 3 \* ROMAN III(600V) IEC61326 (EMC standard). |
SELECTION GUIDE
| Model | Leakage Current Gears | Leakage OperatingTime Range | AC Voltage Gears | Charge function | LCD | Rechargable Battery |
| 15～500mA | 0～999ms | No | No | 128*64 | No |
MEWOI9600C | 5～1000mA | 0～999ms | 0～600V | Yes | 5inch Color Screen | Yes |
| 10～500mA | 0～999ms | 0～250V | Yes | 5inch Color Screen | Yes |
