MEWOI9600 Leakage Protector Tester,RCD(Residual Current Device)Tester

MEWOI9600 Leakage Protector Tester,RCD(Residual Current Device)Tester

  • Name:: RCD(Residual Current Device)Tester
Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

MEWOI9600 Leakage Protector Tester,RCD(Residual Current Device)Tester

MEWOI9600 Leakage Protector Tester can test leakage initiating current, residual non-operating current and leakage operating time of various kinds of leakage protector (Range:0ms~999ms), and with manual and automatic two test modes,The operation is simple, with backlight function, and the measurement result is directly displayed on a large screen,which is clearly visible even in a dark place. current test have 10 grades were 15、30、50、75、100、150、200、250、300、500mA respectively. High accuracy, small size, light weight, delicate appearance and easy to carry, the meter is an ideal tool for on-site or indoor detection of various leakage protectors.

MEWOI OEM/ODM  Instruments Manufacturer

TECHNICAL SPECIFICATION

 Power Supply DC 6V LR03 1.5VX4PCS
 Rated Voltage AC 220V
 LCD Size 44mm×27mm
 Leakage Current Gear 15、30、50、75、100、150、200、250、300、500mA
 Gear Current Accuracy ±(5%+2dgt)
 Test Leakage Operating Time Range 0~999ms
 Leakage OperatingTime Display Accuracy ±2ms
 Power Consumption ≤40mA
 Working Temperature -10℃~40℃;below 80%rh
 Storage Temperature 10℃~60℃;below 70%rh
  Test Mode Manual or automatic
 Test Wire Length 1.8M
 Failure Information Indication LCD display “fault” failure information indication, it is possible that the rated initiating current grade of tested is too small or the leakage protector is faulty
 Line Voltage Test Below AC 250V
 Battery Voltage Alarm When the battery voltage lower than 4.8V, low battery voltage symbol display, and remind to replace the battery. The measurement value is also accurate at this time
 Insulator Strength AC 2KV/rms (between the core and out shell)
 Suitable for safety regulations  IEC1010-1、IEC1010-2-032、Pollution degree 2、CAT Ⅲ(600V) IEC61326(EMC standard)
 Clamp Weight 350 g
 Clamp Size 170mm×75mm×30mm

SELECTION GUIDE

Model Leakage Current Gears Leakage OperatingTime RangeAC Voltage GearsCharge functionLCDRechargable Battery

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600

15~500mA0~999msNoNo128*64No

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600C

5~1000mA0~999ms0~600VYes5inch Color ScreenYes

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600D

       10~500mA0~999ms0~250VYes             5inch Color ScreenYes


Telephone
E-mail
After Sales
QQ