MEWOI1020B Wireless High Voltage Low Voltage Clamp Leakage Current Meter, clamp current tester
MEWOI1020B Wireless High Voltage Low Voltage Clamp Leakage Current Meter, clamp current tester

MEWOI1020B Wireless High Voltage Low Voltage Clamp Leakage Current Meter, clamp current tester

Wireless High Voltage Low Voltage Clamp Leakage Current Meter, clamp current tester, Leakage current meter

  • Main Features：： 1. Measurement of H/L voltage AC leakage current ( above 600V operate with insulation rod) 2. Range: 0.00mA~60.0A 3. Resolution: 0.01mA 4. Peak Hold, Data Storage: 99 Groups 5. Wireless Transmission: 30M 6. Line Voltage: Test of the wire with insulation skin below 60kV, test of bare wire below 35kV (operate with insulation rod) 7. CT Size: Φ48mm
  • Model No.:： MEWOI1020B
  • Name:： MEWOI1020B Wireless High Voltage Low Voltage Clamp Leakage Current Meter, clamp current tester
Contact Us For QuotationEmail:  464560351@qq.comWhatsapp&Wechat:+8618620373879

INTRODUCTION

MEWOI1020B Wireless H/L Voltage Clamp Leakage Current Meter adopts CT technology and mask digital integration technology, the instrument composed of special clamp current meter and  high voltage insulation rod, Wireless transmission of test data, equipped with wireless receiver, can receive the tested data within 30M straight-line distance, If not use  insulation rod, which can be used as high accuracy low voltage clamp current meter.

MEWOI1020B Wireless H/L Voltage Clamp Leakage Current Meter connect with insulation rod, which can use for hight voltage line current measurement of the wire with insulation skin below 60KV or  bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage and so on function, the special clamp current meter convenient to clamp or withdraw the tested wire operate by push or pull back the insulation rod.It is widely used in substations, power plants, industrial and mining enterprises, inspection stations, electrical maintenance departments for current detection and electrical field operations. It can replace the H/L voltage transformation ratio tester, which can measure the H/L voltage current of the primary circuit and the secondary circuit respectively, and then calculate the H/L voltage transformation ratio. The insulation rod is light, has the characteristics of moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, scalable and so on.

SPECIFICATION

FunctionDescription
FunctionH/L voltage AC leakage current measurement
Power SupplyDC 6V(1.5V AAAx4)
Test ModeClamp CT, integration method
Transmission Mode433Hz wireless transmission, transmission distance 30M
Display Mode4 digital LCD display, backlight function, suitable for dim place
LCD Size47mm×28.5mm
Meter SizeDetector: 76mm×255mm×31mm; Receiver: 78mm×165mm×42mm
CT Sizeφ48mm
Sampling Rate2 times/second
Measurement Range0.00mA ~ 60A (50/60Hz automatic)
Max Resolution0.01mA
Shift0.00mA~60A full-automatic
Test Accuracy (23℃±5℃ , below80%RH)0.00mA~999mA , ±1%±5dgt 
1.00A~60.0A,  ±1.5%±5dgt
Data Storage99 groups, in storage process "MEM" symbol display, "FULL" symbol flashes display indicate storage full
Line VoltageTest of the wire with insulation skin below 60kV, test of  bare wire below 35kV (operate with insulation rod)
Data HoldPress HOLD key to hold data in test mode, “HOLD” symbol display, press HOLD key once again cancel this function
Data Access"MR" symbol display, can look up all storage data
Overflow displayExceed measure range overflow function: "OL A" symbol display
No Signal IndicationWhen the receiver has not received transmit signal, dynamic display “no- -”symbol
Auto Shut Down15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
Battery VoltageWhen battery voltage is lower than 4.8V, low battery voltage symbol will display and remind to replace battery.
Meter Weight3630g (include insulation rod)
Working Environment-10℃~50℃, below 80%rh
Store Environment-10℃~60℃, below 70%rh
InterferenceNo interference of 315MHz and 433MHz same frequency signals
Insulation Rod SizeΦ32mm, 1m/pcs(5pcs)
Insulation StrengthAC110kV/rms(all 5PCS insulation rod connect, between the two ends)

Selection Guide

ModelDescriptionRangeResolutionClampNote
MEWOI1000H/L Voltage Clamp Current Meter0mA~1200A1mAΦ48mmBase type
MEWOI1000BWireless H/L Voltage Clamp Current MeterWireless type
MEWOI1020H/L Clamp Leakage Current Meter0.00mA~60.0A0.01mAΦ48mmBase type
MEWOI1020BWireless H/L Clamp Leakage Current MeterWireless type
MEWOI1100H/L Voltage Clamp Current Meter0.00mA~600A0.01mAΦ33mmBase type
MEWOI1100BWireless H/L Voltage Clamp Current MeterWireless type

Packing List


PackageOuter PackageCarton
Inner PackageCloth bag
AccessoryDetector1 PCS
Receiver
1 PCS
Wireless Antenna
1 PCS
Insulation Rod?1M?5 PCS
Tool Bag1 PCS
Manual1 PCS
Certificate1 PCS
Warranty Card1 PCS



label: Wireless High Voltage Low Voltage Clamp Leakage Current Meter
Telephone
E-mail
After Sales
QQ