|Contact Us for Quotation||Email：email@example.com||Whatsapp: +8618620373879|
MEWOI-JYZ-HW Overhead live line fault indicator, fault passage indicator(FPI),Permanent Fault,Transient Fault,Earth Fault
MEWOI-JYZ-HW Overhead Line Fault Indicator is usually used in 5~38KV (can be customized by 44KV, 69KV and 110KV ) overhead line power distribution network to monitor and detect short-circuit and earth fault. The fault signal is indicated by three ultra-bright blinking LEDs with 360º sight.
The indicator can be mounted under live conditions with the help of an adapter and a hot stick. The parameters such as trip current, reset time,blinking interval, etc., can be read and adjusted by a bidirectional wireless tool. Permanent fault, transient fault and battery low voltage alarm can be distinguished and indicated separately by 3 different ultra-bright blinking LEDs. And the earth-fault can be indicated by two alternating different ultra-bright blinking LEDs.
Permanent Fault: Red ultra-bright blinking LED.
Transient Fault: Green ultra-bright blinkingLED.
Earth-fault: Red and Green ultra-bright LEDs blinking alternately.
|Low Battery Warning: Yellow ultra-bright blinking LED|
Parameter Adjust: The parameters can be read and adjusted by bidirectional wireless tool.
|Power Supply: The indicator can take power from overhead lines, with lithium battery as backup.|
Short-circuit Trip Current
(Phase to Phase
|50~1200A adjustable, 1A step, 150A default|
|Trip Current Delay||40, 80, 120, 200ms, can be set during production|
|Indication Unit Reset|
1. Manual by magnet. 2. Time reset:adjustable,1second step,24h default,max.48h
3. Auto delay reset after repower,1 second step,30s default max 5min,only for
|Protection Class & IK Class||IP68|
|Internal Type Test||IEEE495-2007|
|Operation Temperature Range||-40~+70℃|
|Power Supply||Lithium battery type AA 3.6V/9Ah, replaceable|
|Battery Life||10 years|
|Dimensions||Diameter: 93mm Height: 170mm|
|Accuracy Read&Set Parameter from Indicator|
0A~300A ±3A,300A~800A ±1%
&433MHz in indicators to read and set parameter
|Cable Diameter Ranges||6mm~42mm|
|Blinking Frequency||10 per minute, adjustable|
|Max. load/fault Current||1200A|
System Frequency (Hz)Self-adjusting
|50/60 Hz & 60s self-adjusting|