Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

INTRODUCTION

MEWOI1100D Zinc Oxide Arrester Leakage Tester has unique features of automatic plug function, specially designed and manufactured for high voltage current measurement; use the latest CT technology and integrated mask digital technology; composed of special high voltage detector, wireless receiver and high voltage insulation rods. Wireless transmission can receive the measured data by penetrating storey building barriers or 30 meters.The integrated design of clamp and lead zone of MEWOI1100D Zinc Oxide Arrester Leakage Testerensures uninterrupted year-round high precision, high reliability and high stability test.

In general cases, the leakage current of Zinc Oxide Arrester should be less than 500uA. Can judge the operation of lightning arrester lightning arrester leakage according to the test, if measured lightning arrester leakage current is too large, more than 500uA, excluding the system voltage is too high, then the arrester may have dirt or moisture or aging, the larger the leakage current, more serious of dirt or moisture or aging. The leakage current to be a importance reference to the maintenance department to find the power transmission problem, or to check whether an  arrester should be unstalled to under testing in lab or replace, avoid unnecessary replacement.

TECNICAL SPECIFICATION

FunctionHigh precision and resolution measurement of leakage of Zinc Oxide Arresters
Power SupplyDC6V Alkaline Dry Battery (1.5V AAA X 4)
Test ModeClamp CT, integral approach
Transmission ModeWireless transmission, the maximum distance of straight line transmission is about 30m
Display Mode4 bit LCD display, with backlight function
LCD Dimension47mm×28.5mm
Meter DimensionHV detector: 68mm×245mm×40mm; Receiver: 75mm×170mm×30mm
Clamp Dimension33mm
Sampling Rate2 times/second
Measurement ScopeAC 0.000mA-30.00mA(50/60Hz Automatic identification)
Resolution1uA
ShiftFull automatic shift
Accuracy±2%±5dgt (23C±5C, Below 80%RH)
Data Memory99 sets, memory process is shown by MEM , full storage is shown by blinking FULL
PEAK value maintainingAutomatically maintain the high test value, in usual testing mode, press key HOLD till the lighting of PEAK, that is, start PEAK to maintain this function. 
Data HoldIn usual testing mode, press HOLD key to keep data, shown by “HOLD”
Data Access“MR” indication, can access to all data
Overflow DisplayOver-range overflow function: shown in “OL A”
No Signal Indication“no- -” is shown when receiver does not receive the dynamic display of signal transmission
Automatic Shutdown15 minutes after boot
Battery VoltageWhen battery voltage is lower than 4.8V, battery voltage is shown in low symbol to remind battery replacement
Meter massDetector: 335g (with battery), the total mass of meter: 2.5kg (including insulation rod and battery)
Working Temperature and Humidity-25C-40C; below 80%Rh
Storage Temperature and Humidity-10C-60C; below 70%Rh
Insulation Rod Dimensionφ32mm, 1m/piece (5pieces)
Insulation StrengthAC 100kV/rms (between the 5th insulation rod and high voltage current clamp core)
StructureAnti-drip type II
AccessoriesClamp: 1 piece; receiver: 1 piece; meter box: 1 piece; insulation rod (1m): 5 pieces; battery (alkaline battery AAA): 8 pieces

Field Application

MEWOI1100D.06.jpg

TECNICAL SPECIFICATION

FunctionHigh precision and resolution measurement of leakage of Zinc Oxide Arresters
Power SupplyDC6V Alkaline Dry Battery (1.5V AAA X 4)
Test ModeClamp CT, integral approach
Transmission ModeWireless transmission, the maximum distance of straight line transmission is about 30m
Display Mode4 bit LCD display, with backlight function
LCD Dimension47mm×28.5mm
Meter DimensionHV detector: 68mm×245mm×40mm; Receiver: 75mm×170mm×30mm
Clamp Dimension33mm
Sampling Rate2 times/second
Measurement ScopeAC 0.000mA-30.00mA(50/60Hz Automatic identification)
Resolution1uA
ShiftFull automatic shift
Accuracy±2%±5dgt (23C±5C, Below 80%RH)
Data Memory99 sets, memory process is shown by MEM , full storage is shown by blinking FULL
PEAK value maintainingAutomatically maintain the high test value, in usual testing mode, press key HOLD till the lighting of PEAK, that is, start PEAK to maintain this function. 
Data HoldIn usual testing mode, press HOLD key to keep data, shown by “HOLD”
Data Access“MR” indication, can access to all data
Overflow DisplayOver-range overflow function: shown in “OL A”
No Signal Indication“no- -” is shown when receiver does not receive the dynamic display of signal transmission
Automatic Shutdown15 minutes after boot
Battery VoltageWhen battery voltage is lower than 4.8V, battery voltage is shown in low symbol to remind battery replacement
Meter massDetector: 335g (with battery), the total mass of meter: 2.5kg (including insulation rod and battery)
Working Temperature and Humidity-25C-40C; below 80%Rh
Storage Temperature and Humidity-10C-60C; below 70%Rh
Insulation Rod Dimensionφ32mm, 1m/piece (5pieces)
Insulation StrengthAC 100kV/rms (between the 5th insulation rod and high voltage current clamp core)
StructureAnti-drip type II
AccessoriesClamp: 1 piece; receiver: 1 piece; meter box: 1 piece; insulation rod (1m): 5 pieces; battery (alkaline battery AAA): 8 pieces


Clamp: 1 piece; receiver: 1 piece; meter box: 1 piece; insulation rod (1m): 5 pieces; battery (alkaline battery AAA): 8 pieces

Telephone
E-mail
After Sales
QQ