MEWOI3800D Multifunction Non-Contact Resistance Online Tester is our company devotes ourselves to Grounding resistance test technical research’s another new high-tech product for more than ten years. Detector adopts weather fastness material manufacture, temperature resistance, cold-resistant, corrosion prevention, fire prevention. Detector’s structure is rigorous and firm, against rain, dustproof, installation and use outdoors. Non-contact measurement, safe and reliable, Ease of installation. Grounding down lead is directly through the detector perforation, Will not affect lightning protection grounding effect and the normal operation of the facilities. Ensure high-accuracy, high stability and high reliability of long time on-line monitoring outdoors, underground mine and indoors.
MEWOI3800D Multifunction Non-Contact Resistance Online Tester is equipped with LCD display and alarm light, which can observe grounding resistance value at any times and set the alarm critical val. Alarm light will flash when measured value is beyond pre-set critical value. Detector applies to electric transmission line pole ground connection, underground mine device ground connection, meteorological lightning protection grounding connection, petrochemical engineering ground connection, communication ground connection, rail facility ground connection, building the warehouse ground connection, electrical equipment ground connection etc.. Detector provides power supply and RS485 signal interface, and standard MODBUS-RTU communication protocol，which user can do secondary development to realize remote monitoring.
MEWOI3800D’s LCD shows measured value directly, also sets up Detector’s alarm critical value, and possess audible and visual alarming function, which is very suitable to Independent installation and use when it needn’t form a network.
Earth ground Tester
Click the "Blue"marked model No. to view the detailed specification
|Model||Range||Resolution||clamp size||RS232||Data Storge||Audible and visible alarm||Other|
|MEWOI3800C||0.01Ω-200Ω||0.01Ω||60mm*30mm||Appoint with RS485 communication interface, provide standard MODBUS-RTU communication protocol||×|
|MEWOI3800D||0.01Ω-200Ω||0.01Ω||60mm*30mm||×||LCD display,warning function.|
|0.01Ω,1V||√||400sets||2/3-wires measurement of earth resistance/voltage|
|0.01Ω,0.01Ωm,1V||√||300sets||2/3/4-wires measurement of earth resistance,soil resistivity,and earth voltage|
earth resistance:0.01Ω～30.00KΩ;AC Leakage current: 0.00mA~600A;
soil resistivity:0.01Ωm～9000KΩm;Earth Voltage:0.0~100.0V,dual clamp: 0.01Ω-100Ω
|0.01Ω,0.01Ωm,0.01A,0.1V||ø68mm||√||2000sets||2/3/4-wires,selection & dual clamp method to measure the earth resistance,soil resistivity,earth voltage,AC voltage,AC leakage current,warning function.|
Return circuit ground resistance, metallic return connection resistance, grounding conditions on-line monitoring
|6VDC~9VDC, 50mA Max.|
60mm×30mm, closed mode (60mm×4mm steel flat
or external diameterФ30mm electric cable)
When show value is beyond 500Ω, systems software and LCD show “OLΩ” sign.
|A one meter long wire (5cores shielded wire)|
Red/brown---power supply input anode;
Black--- power supply input cathode.
Blue---RS485 signal anode;
Grey---RS485 signal cathode;
White--- analog grounding (power supply input cathode can connects with analog grounding by short circuit connection)
|RS485 standard MODBUS-RTU communication protocol|
|Detector Audible and visual alarm instructions|
|Detector panel setting|
|4digits LCD direct indication|
Installing Screw Hole Size
Working Temperature and Humidity
|-10℃~ 45℃; 20％RH ~ 90％RH|
GND Interference Current
External Magnetic Field
External Electric Field
Single Measurement Of Time
|About 0.5 second|
|Grounding wire through Detector centre bore|
Level Of Protection
|Avoid rain and water logging|
Power Supply Mode
|External power supply (Equipped by user)|