Safe and Time Saving
|Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while MEWOI2000D uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-phase insulating sheath by three super-sensitive high-insulated clamps. Conducting measurement on sheathed cable significantly improves the safety of field testing, effectively protect the operator’s personal safety and increase productivity!|
|Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient.|
|In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens.|
|LED dynamic display, intuitive and clear|
Sensitive and reliable
|More sensitive MEWOI2000D clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity.|
Beautiful and scientific
|The three clamps of MEWOI2000D are in three colors, Red, Yellow and Green; It is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance.|
Ultra-low Power Consumption
|MEWOI2000D has a better power-saving performance with the maximum rated power of 100mVA.|
卐 Selection Guide
|Model||Function||Display||Max Dimension to be clamped||Dimension (mm)||Range||Capacity||Other|
|MEWOI2000D||Phase detection (Normal, Reverse)||LED||Φ1.6~16mm||70*75*30||AC70-1000V||Continuously using 200 hours||Base plate with magnet,more convenient|
|Phase detection (normal phase, reverse phase and phase deficiency), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance.|
|DC3V AA Mn batteries (R6P) ×2 PCS, Continuously working for 200 hours|
AC Voltage Range(V)
|AC0～600V, 40～70Hz (Sine Wave Continuous Input)|
Clamp Wire Size
【Positive Phase Sequence】
The four phase-sequence lamps blink in order (clockwise).
【Negative Phase Sequence】
The four phase-sequence lamps blink in order (counterclockwise).
【Line-voltage Indication】L1、L2、L3 lamp light up.
【Default Phase】L1/L2/L3 lamp is off.
【Open Circuit】L1/L2/L3 lamp is off.
Power On Indication
|Power on indication light turns on|
Auto Power off
|After 5 minutes, the meter automatically cut off power supply.|
|Width, height, thickness 70mm*75mm*30mm|
Clamp Lead Length
|180g (with battery)|
Working Temperature and Humidity
|-10℃~55℃; below 80%rh|
Storage Temperature and Humidity
|-20℃~60℃; below 90%rh|
Maximum Measured Voltage
Maximum rated Power
|EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT Ⅲ(600V), Transient over-voltage 6000V|
|Meter: 1 Piece; Carrying case; 1 Piece.|
Meter: 1 Piece; Carrying case; 1 Piece.